These compact and economical clamps enable you to fixture more parts on the machine table. The steel wedge spreads the clamping force uniformly on both sides of the 7075-T6 aluminum channel. These clamps allow you to hold two parts with equilateral clamping action.  They work on both flat and round stock.

NOTES FROM PRODUCT TABLE
*W1 is the distance needed between workpieces for clamp clearance. Drill and tap mounting hole on the center of W1 dimension.
**W2 – A milled slot wider than W2 dimension will insure clamp remains in line with workpiece. Clamp sides should not come in contact with slot walls during expansion.